Electric cradle controller swinger cradle driver with external power practical cradle driver cradle controller Feature: Name: electric cradle controller electric cradle/swing controller for suspended cardle —up—down—up—down— power consumption: 11W Input: 220V or 110V Output: 12DC Rate: 50Hz Easy to operate Height variance: 3CM – 50CM Advantage: Practical, power saving, nice, high qulity, cheap price adjustable swing strength Electronic baby cradle design for all families safe and easy to operate save electricity give baby a wonderful sleep lighten monther’s burden Installation instructions: First, hang the puller on the ceiling or other holder, Then, hang the empty cradle, and keep cradle height be 60cm from the floor. Last, fix the electric wire in the proper position. Note: When load weight about 10kg, you need to install four spring; but when above 14kg, five spring should be installed. Using instructions: 1. Put baby in the cradle, and adjust the controller to 0, press the power switch on, then the indicator be light means the controller works. 2. Adjust the regulator to appropriate swing amplitude. When you use next time, just need to switch on. 3. You need to add puller spring according to the cradle weight.